3, 13 fixed colors, and 5 mode settings as: fixed color, FADE, JUMP, FLASH and timer.
4, 21-key remote controller, remote range is 8--10 meters.
5, motion sensor works when remote controller turn off the light
6, Motion sensor scale is 120 degrees,3--5 meters
7, Power supply: DC adapter + AAA battery or built-in rechargeable lithium battery 1500 mAh
8, Timer: the light turns off in 30 minutes
9, Flash: press the button FLASH to make the currnt color flash
10, Dimable: decrease the brightness in 4 grades.
11, packaging: 2*lights and 2* remotes in a white box
box size: 11*11*7CM 50 boxes in a CTN
CTN size: 57*24*37CM
How to use:
1, When switch the light on, the lights are white in medium brightness. It will turns off automatically in 30 seconds if there is no motion detected.
2, Remote controller is prior to motion sensor. Only when the remote controller turns off the light or never use the remote controller, does the motion sensor work.
3, The buttons of TIMER ,brightness down and brightness up work only in remote-control mode.
1, Install the batteries correctly or connect the light to the adapter (5V output)
2, Push the switch on the light to ON position to switch the light on.
3, The light will be on white color in medium brightness,the motion sensor works.
4, Keeping moving in the scale of 120 degree 3--5 meters, the light will not turn off.
5, The light will turn off automatically in 30 seconds if no motion is detected.
6, Remove the protective plastic tab from battery compartment on IR remote control before use it.
7, Change colors or mode settings by pressing the buttons on the remote controller while pointing to the face of the light.
8, Press OFF button to switch the control to motion sensor.
9, When press the OFF button, the lights will be on white color if the motion sensor detects motions.
10, When press the OFF button, the lights will be off if the montion sensor detects no motions.
11, To turn the light off by pushing the switch on the lights to the position of OFF.
12, Use an adapter to charge the bettery inside or as power supply, the output of the adapter is 5V.
13, The battery is fully charged when the blue indicator is off.
14, The adapter will not charge the AAA batteries in the battery compartment.
Your one-stop solution for events lighting!
JEJA International Corporation Limited is your idealest one-stop purchasing agent in China! You can buy from us the most cost-effective products produced by us own and the finest products produced by other Chinese suppliers as well. We offer you the best products from China, our best service,and purchasing sulations. Come to us if you have an idea and want to turn the idea into products; Come to us if you need someone to help you inspect a factory or products; Come to us if you want to find out what the suitable lights for your market are...
Hexagon lights turn on and off individually with a tap of the hand. This will either give you further lighting customization control, plus some fun tactile times with illumination, or make it real irritating to turn your lights on and off, especially if you go full throttle with the hexagon lights.
The hexagonal wall lights consist of flat hexagon modules fitted with LEDs and USB port edges so you can mount them to your wall in any pattern or design you like. The lights attach to walls with adhesive pads.
There are many colors available: white, warm white, red, green , blue, pink etc...
RF remote controlled dynamic hexagonal LED light is easy to be connected one another with USB boards. You can make them in various shapes you like.For instance, a heart, a flower, a line, a big panel, circles,animal shapes or business logos,etc...
It's used to put on walls of KTV, bars, dancing halls, sitting rooms and shops for music. Also, the light is suitable for events design. For example, a big welcom panel for a wedding, dynamic line on the wall, decoration on tables or decorate the edge of the stage, etc...
There are over 300 dynamic color changing modes for you to enjoy.
You can find our fine designed products in the product page. We have been designing and producing remote controlled led lights according to the demand of the market and customers for over 10 years. There are about 10 products very popular in the market and copied by competitors. We are good at designing IR remote controlled LED lights, RF remote controlled LED lights and bluetooth controlled led lights. These lights are widly used for wedding decoration , events design, home decoration,etc....
Turn your ideas into products and boom your business!
You can turn our lights into your own with your LOGO or package. And we can turn your ideas of a light into real product. We helped draw 3D pictures, make testing prototypes, built molds, make PCBs and produce lights for our customers. All these were at very resonable cost and fast delivery! We have R&D team with 3 engineers and many co-engineers who are ready to help you any time. The co-engineers are in fields of mold designing, material, electronics, telecomunication and product structure. Making new LED lights for our customers brings us great joy!
Everything you need from China can be found by us.
No need to come to China so often to look for factories or products! No need to worry about payment safety!
Once you order from us, you'll find out that we are trustworthy!
Once you trust us, we'll be your best Chinese partner!
Just tell me the product you need , we will get the best solution for you. We have been helping some customers purchase wedding lights, wall lights, orb lights, candle lights, uplighting, hexagon lights, table lamp, stage lights and balloon lights, etc....
We can help you find the best LED lights for your wholesale business, retail, e-shop, rental or event design business.
No need to come to China to inspect factories or products!
No need to worry about the quality of your ordered products!
Let us know your AQL, we will be your quality guard.
With more than 10 years' experiences of quality control, we are your reliable inspectors. We helped tens of thousands of customers inspect their new suppliers and products. The total satisfaction ratio is over 93%. We know problems of LED lighting products, so we can easily get to the point. There is a long list of the products we inspected, including LED light base, submersible led candles, remote controlled lightbase, rechargeable light base for centerpieces, ball lights, remote controlled orb lights, forster egg lights, Christmas decorating lights, motion sensor cabinet lights , solar lights and strip lights, etc....
Before you start looking for lighting ideas or reaching out to vendors for quotes, you’ll want to know these key wedding lighting terms so you’ll know what you (and the pros) are talking about:
Uplighting – lights that are placed on the floor and shine up the walls in various colors
Gobo light – a template that light shines through to create a pattern, monogram, or motif on the floor, ceiling, or wall
Texture lighting – the same as a Gobo light but with a preset pattern, such as leaves or a starry night sky
Spotlight – a lamp that projects a narrow beam of light on one particular area or object
Pinspot – a tiny light used to illuminate a small area, such as a centerpiece on a table
String lights – also referred to as twinkle, fairy, bistro, or cafe lights, these strands of lights are the most versatile and cost-effective way to light up any space
Pendants – also known as drop or suspender lights, these are single fixtures that hang from the ceiling
LED light – type of bulb that is cost-effective, long-lasting, and provides more vibrant color than a traditional bulb
Color wash – a general fill of color used throughout an entire room that doesn’t highlight any particular area
WEDDING LIGHTING IDEAS BY STYLE
Romantic – If your style is romantic and classic, you can’t go wrong with tons of candlelight, string lights, and crystal chandeliers. Keep the glow soft and warm to create a cozy ambiance that makes guests feel welcome and relaxed.
Rustic – If your style is more rustic, antique lanterns, paper lanterns, Edison bulb pendant lights, and marquee lights can help you bring a raw, natural feel to your wedding design. Your mood should have an at-home feel, which requires simple lighting with a hint of charm.
Modern – If your style is modern and minimal, hurricane vases with floating candles, spotlights, and color washing can provide drama without too much fuss. You’ll probably want to opt for LED lights because they provide more vibrant colors than traditional bulbs.
Glamorous – If you love a glamorous style, you’ll want to go for more dramatic lighting sources, such as crystal chandeliers, candelabras, lit topiaries, and curtains of lights. Since nothing says glam like a little glitz, make sure to add sparkly details near the lighting sources so they reflect and add a glow to the room.
In addition to your wedding style, you should also think about what elements of your wedding are most important to you. If you invested a large portion of your budget into the flowers, you’ll want to be sure they’re sufficiently lit with pin spots or candles so your guests can see every detail. If you’re more interested in getting everyone on the dance floor, consider disco balls and gobo or texture lights to keep the party vibe up all night long.
TIPS FOR INDOOR AND OUTDOOR WEDDING LIGHTING
For an indoor wedding, you’ll need to know what lighting is already in the venue so that you can simply add to it or work around it. Uplighting is great for accentuating architectural features or changing wall colors to match your palette, and color washing can help create different moods in different rooms throughout the venue. This is where a lighting design pro will be your best friend! They can help figure out what existing fixture will work and what to add to get the look you want.
For an outdoor wedding, power sources will likely be your biggest roadblock. If you’re getting married at night, you’ll also want to make sure all pathways to the venue, to the parking lot, and to the bathrooms are lit. For a small backyard wedding, you will likely be good with simple string lights in and between trees and votive candles on every table. But, if you’re having a big outdoor celebration in a courtyard or tent, you’ll want to call in the professionals! They might need to bring in generators for more power and will save you the hassle of trying to hang lights in high places.
A guide to choosing the right lights for your home
Lighting options are available in a variety of budgets, from traditional to contemporary styles. Fixtures crafted in metals, glass, crystals, bamboo and fibre, come in different sizes and shapes. Floor lamps, wall scones, ceiling lamps, spot and pendant lights, chandeliers and light strips, can also be used in a home’s décor.
Before selecting the fixtures and deciding on its placement, one needs to have a clear idea about the purpose of the lighting. “The aim should be to minimise the number of fixtures and maximise their effect and functionality,” points out Komal Vasa, a lighting and interior designer from Mumbai.
The main lighting source should be bright. You can use LED lights of relevant wattage, to give a comfortable feeling. Consider the ceiling height, before hanging a chandelier. It should be mounted at least seven to eight ft above the floor.
On a workstation, place the lamp at a correct angle, to ensure that no shadow falls on the working area. A side table with a lamp, not only has its own charm but is also useful as a reading light. Lamps in the bedroom need to be at a convenient distance from the bed, making it easy to operate. While selecting light fixtures, ensure that it complements the overall theme of the house and furniture design. Choose fixtures that are easy to maintain – spares and accessories should be easily available in future, for replacement. Ensure that the children’s rooms are bright. Avoid floor lamps and glass lamps for safety. Always have extra plug points for lights (like fairy lights and lamps) that you can use during festivals and special occasions.
what's new in our facebook
JEJA International Corporation Limited is your idealest one-stop purchasing agent in China!